Top 5 Mistakes Made When Making Homemade Snack Sticks!


  • Walton's Employee

    Well made snack-stick

    Learn about the top 5 mistakes made when making homemade snack sticks!

    Hey guys, it’s Jon from Meatgistics and today we are going to show you 5 common mistakes that people make when they are making homemade snack sticks. Snacksticks are a great treat and a fun way to try some great seasonings as long as you are making them correctly! No one wants to put in all the time and effort into making a batch of snack sticks just to have an easily avoidable error ruin your batch! Read this article for the top 5 most common issues people run into when making snack sticks! …#3 will shock you!!!

    Well made snack-stick

    #1 You are not using a Binder! The term Binder can be a bit misleading, yes it’s main function is to help the product bind together but it does much more than that. A more accurate description of what it does is increases your margin of error for a few of these steps! For example, how long you mix and grind your meat are extremely important when making snack sticks because you need the correct amount of protein extraction, if you miss it by a little bit then your texture and taste are going to be off, well you can extend that margin of error by adding a low cost binder like carrot fiber! That is not all binders do of course, they also give you more room for error in the smokehouse, make stuffing easier and they increase your final yield, meaning more snack sticks for the family to enjoy! For a few dollars a package adding a binder is a really great way to make sure you are making a better product. Have you ever had your casing separate from your meat during the cooking process? That is probably because you did not get enough protein extraction during the mixing phase and a binder can help with that!

    Campfire Sticks

    # 2 You are not using Smoked Meat Stabilizer with wild game. Snack sticks can be made out of almost any meatblock but you can’t treat an all beef or pork snack stick the same as one you are making out of a deer you got last weekend! If you are using any type of wild game like venison, elk, moose, etc. you need to be using smoked meat stabilizer. Smoked Meat Stabilizer is a cure accelerator that helps kill many common bacteria found in meat processing but especially in wild game! This makes your product safer and also helps to preserve the smoked flavor after packaging.

    # 3 Your meat Block is too Lean! if you are making homemade snack sticks you want a fat percentage of 20% or more. The fat acts as a vehicle for the seasoning and coats your mouth and tongue with the taste allowing you to get more of the flavor and allowing it to linger longer. Fat also gives the snack stick a more pleasing texture and prevents it from drying up. Fat gets demonized by a lot of people because they associate the fat we eat with the fat on our bodies. Now, I am not saying you should switch to an all bacon and sausage diet but fat is essential to keeping our bodies running properly and it is going to give you a better all around product.

    # 4 You are cooking your snack sticks too quickly. If you start cooking at a higher temperature, you risk creating a tough and dry exterior and casing, sometimes known as case hardening. This can cause an issue because once the outside of the stick has cooked it will no longer efficiently transfer heat to the center of the stick, leaving you with an overdone exterior and an under-cooked interior. Case hardening basically makes it hard to fully cook the product up to a safe temp, and it does not allow moisture to escape as easily and in a semi-dried product like snack sticks part of our goal is to dry the product out (to an extent, but not as dry as something like jerky). A slow and incremental increase in your smoker temps will help the meat temp rise at a rate that will help prevent case hardening, while still creating a safe and consumable product when finished. Within 2 hours we are setting the smokehouse temp up to a high enough temp to really get the meat up into a temperature range that will begin killing bacteria, and that should be within a sufficient enough time to not be a concern. For more information on this check out our Snack Stick Tutorial which will walk you through the process step by step!

    # 5 You are either over or under stuffing your casings. If you have ever had your casings pop or burst during the cooking process there is a good chance you are overstuffing your casings. If you normally end up with an extremely wrinkly product then their is a good chance you are understuffing your casings. With anything you are going to link like sausages it is better to understuff than to overstuff as you can always twist them a few more times to tighten them up, but you can not do that with a snack stick. It will take some practice but finding the correct stuffing proportions will help you with the appearance of your product and the ease of cooking.

    So there are 5 very common mistakes people make when making snack sticks! If you have questions on what might be causing a specific problem for you leave us a comment and we will get back to you, or you can always follow me on here and send me a private chat if you’d prefer to not post your question so everyone can see it!

    Shop waltonsinc.com for Walton’s Sausage Stuffers

    Shop waltonsinc.com for Snack Stick Casings

    Shop waltonsinc.com for Sausage Seasonings

    Shop waltonsinc.com for Meat Additives

    Shop waltonsinc.com for Grinders



  • @jonathon Is there a reason that a finished meat stick would have a slightly gritty texture?

    Thanks for any insight you may have.


  • Walton's Employee

    @phoffman Without more information the only thing I can think of is the seasoning (or another additive) did not mix in well enough with the meat, fat and water and some of it did not dissolve. That could be what you are feeling when you bite into it?

    What seasoning did you use? Were there any additives like Citric Acid or a binder? What casings did you use? How much water did you add and how much protein extraction did you get? Give me as much information as possible on your process and I will see if I can pinpoint any other possible issues!

    A close up picture of the snack stick diameter might be helpful as well.



  • @jonathon Thanks for the quick response. I am making my own seasoning and there are some flavors used in it as well. The composition of 1 lb is roughly:
    70% Beef (80/20)
    15% Pork (70/30)
    Excalibur Sure Gel (used at recommended level)
    Prague powder (used at recommended level)
    4% seasoning and flavor
    1 Tbsp Worcestershire sauce
    These ingredients were mixed in a stand mixer for 10 minutes and Encapsulated Citric added at the last second of mixing
    They were stuffed into Walton’s 16mm smoked collagen casings

    0_1519763144555_Cross Section.jpg

    Thanks again for any insight you may have!


  • Walton's Employee

    @phoffman Thanks for the information. If we leave out the possibility of one of your ingredients in your home mix being the culprit then the most likely issue is the Worcestershire Sauce. It can denature the meat quickly which could be the cause of your issue. On your next batch I would say leave that out and see if it fixes it! Let us know if we can be of any further assistance.



  • Does soy sauce denature the meat like worcestershire sauce or is it ok to use in a meat stick?


  • Walton's Employee

    That’s a great question but a difficult one to answer! Usually, Worcestershire Sauce will have a pH of 3.6 - 4.1 while Soy Sauce has 4.4 - 5.4. Negative pH (below 7) can cause denaturing in your meat and if you have something like the 3.6 (low range of the Worcestershire Sauce) it can cause issues even when added in smaller amounts.

    If you look at the ingredients in Mandarin Teriyaki Snack Stick or Sweet Teriyaki Jerky (you can do this by scrolling down and then clicking on “Additional Info” button) you will see Soy Sauce as an ingredient, so it can absolutely be added, it just needs to be in the correct amount. This is a major reason that we recommend prepackaged seasonings, your at home recipe can be wonderful but it also has the potential to destroy your products.

    So, if you are going to experiment with Sauces with a negative pH then my advice is to start at very low concentrations and work your way up till you find a good amount that provides the taste you are looking for and does not negatively affect your finished product.

    Anyone else have any suggestions?


Log in to reply
 



Recent Posts

  • J

    @stan 'll echo the statements of others. Using your meat grinder to stuff can be labor intensive and slow going. An extra set of hands is almost required.

    read more
  • Meatgistics University Video Weekly Blog Post - Meatgistics University is Live!

    Find out what's going on at Walton's and Meatgistics this week. We will have a loose schedule for soon to be released videos, what we are working on long-term and maybe a few quick tips and tricks that are on our mind!

    What Videos are being released soon?

    Well, we just released 44 videos yesterday on our youtube page! I put them all into a playlist that you can view here (https://www.youtube.com/user/WaltonsTV/playlists) but probably the easiest way to digest this information is by going to Meatgistics University Home Page where we have everything listed out by category, then once you click into that category we have individual posts and videos on topics.

    But we will be releasing Will It BBQ? Squid this week and then the Octopus one the following week. We have a couple other videos done and ready but we will wait on those a while to give everyone a chance to digest some of the information from Meatgistics University first.

    I posted the link to the Livestream for anyone who missed it yesterday. There are still some unused 10% off coupon codes so watch the video if you are about to order and want 10% off your order. We also have a $10 coupon code in that video that will be good for everyone through 11/30.

    What Projects are we looking ahead at?

    Advanced Meatgistics U classes. I am really excited for the 201, 202.etc, classes as we will get to talk more about tips and tricks for making better products and we will be able to show some more examples of what we are talking about. For some of the introductory classes, there wasn’t any way to show you what we were talking about, too much of it was just me talking. We will be fixing that in future classes but that will mean that the videos will be more spread out, which isn’t necessarily a bad thing!

    What’s on our Mind?

    The Livestream went very well last night, especially for our first effort, we had 1,000 people on the site at one time or another and we received excellent questions from those visitors. We will have some more clear instructions with how to work the chat next time as well as there was some confusion between the chat for the Livestream and Walton’s Customer Support Chat. Luckily our excellent customer service team did a great job and was able to direct most people to the correct place to ask your questions. So a big thank you to them! We also got a few good ideas for future videos from viewers questions.

    New Products

    Blue Head Cheese Casings one of the specialty sausages we are eventually going to get to is Head Cheese. When we do it we will absolutely be using these headcheese casings and these hold about 8 lb each so we will have plenty of it!

    read more
  • @raider2119 I’ve never used apple cider either. It might well work but I would think spraying it from a spritzer bottle occasionally onto your meat would be more effective.

    I’ve changed to Pecan for almost everything, its a little too mild for some people but I think it is the most versatile of them all. Never had a problem with Beef, Pork, Chicken or veggies!

    And @raider2119 thanks for joining us for our livestream last night, it was a good time and we will be doing more of them!

    read more
  • @Douglas-Moore If you used duck did you cook up to 165°? If you are using ground poultry you should be cooking to 165 instead of 160° if you are using beef/pork. Another idea is when did you mix in the pork fat? When adding pork fat the best time to add it is during the grinding process if you are mixing it in after the grinding you run the risk of having the fat encapsulate the proteins and make it difficult for everything to bind together properly.

    Last thought would be to add a binder like Sure Gel or Soy Protein Blend that will add some protein to your product and make protein extraction easier. If you are looking to firm it up more I don’t know that Carrot Fiber would be the best choice.

    read more
  • R

    Just an FYI, everybody that received snack sticks for Christmas last year loved them… I just ordered another batch of Willie’s Snack Stick spice blend to do it again this year!

    read more
  • R

    Jonathon, I have to agree that 275 is too hot… If you have the time I’d shoot for 225, but if it needs to be “done”, then 250 would be the max I would do…

    I have always filled the water pan for everything I smoke… 2 reasons, first it does tend to add moisture during the long cook thus keeping the bark from turning to shoe leather… and second because the water pan acts as a heat sink and helps maintain the temperature (in my vertical propane smoker) a bit more accurately… I’ve heard folks tout using apple juice in the water pan to impart a sweeter flavor, but I’ve never tried it…

    On the other hand, my dad smoked for years, mostly in a converted fridge with an electric hotplate in the bottom… he never used a water pan and never had an issue with dry meat…

    As for the type of wood to use, that’s just a trial and error, personal preference thing… I happen to like steaks cooked with oak… that may be too strong a flavor for your taste (my GF hates it)… Recently I have been using a lot of maple for NC bbq, chicken and even cheese… I like the maple for the meats, but next batch of cheese will go back to the hickory / cherry mix that I was using…

    read more

Recent Topics

Popular Topics

25
Online

2.0k
Users

654
Topics

2.1k
Posts


Looks like your connection to Waltons Community was lost, please wait while we try to reconnect.