sausage stuffer problems



  • When I’m trying to stuff summer sausage of snack sticks the seal on my stuffer pops out the top. I am not trying to go to fast or holding the casings to tight. Anyone else have that problem ? How do I stop that from happening ?


  • Walton's Employee

    @kunze7 Interesting, two things could be the issue. First, are you using white oil or some other food safe lubricant on the gasket before each use? If not then that should fix your problem though you might need a new gasket as if it’s been run without white oil it might have been stressed beyond usefulness. The second thing would be the air relief valve in the piston, make sure it is moving freely and there is nothing interfering with the spring, if that can’t move freely it might be causing your issues.

    Let me know if you are doing both of these things already!



  • I have not used any kind of oil or lube on the gasket. Some times it works good others not. And the spring on the air vent seems to be fine. Could the meat be to sticky ?


  • Walton's Employee

    @kunze7 Yes and no, the fat in the meat will eventually lubricate the gasket but initially yes, without lubrication of the gasket if you have a product that has a lot of protein extraction and not a bunch of water that could be part of your issue. However, I think if you start lubricating it with something like white oil your issue will go away. If it keeps happening it is because of the gasket was stressed from being run without lubrication so it might need replacing.

    Let me know if you need anything else!


  • Walton's Employee

    @kunze7 One other possible thing that could be causing your issue is that the gaskets are directional, there is an up and a down on it. You want it oriented with the V pointing down into your cannister.


  • Walton's Employee



  • the last time i was stuffing sticks, my bleed must have not been open enough, it was building up pressure and when i let go of the crank handle, it flopped around and smacked me in the cheek bone. had that been my nose it would have been broken. i have the 11lb stuffer, i had a different brand before. gave it to my daughter, it was much thicker steel. Sorry i gave it up now. it cranks hard and takes two c clamps to hold it to the table top. had this happened the first time i used it i would have returned it. NOT HAPPY now that i know what that handle can do when ur not expecting. i was stuffing along, which is a handfull in it self.



  • @cornpatachguy I had the same problem with mine except it hit me on the back of my hand. These stuffers are not safe and I have quit using mine because of this. My Lemm although smaller than I’d like works very well and the handle does not spin back on me when it’s let go. I have learned that bigger is not always better with stuffers, the pressure generated by trying to take the meat from a large 6" or so tube into a fraction of an inch tube is huge. All of my small casing is stuffed with a 5 pound stuffer. It’s a pain in the neck filling the stuffer so many times but much safer than the flying handle.



  • i read the one reply, don’t know how to shut the unread box off


Log in to reply
 


Recent Posts

  • Some of probably the most over looked places to buy meat are College/University meat labs. Labs that I am familiar with include K-State, Oklahoma Panhandle State, Garden City Community College, and Red Raider Meats at Texas Tech. If you live close to an ag school that is somewhere I would certainly look to buy meat, not just for the quality, but you will be supporting the school and students in those meat programs as well.

    read more
  • @everyone Taco Snack Stick Seasoning is on order! I’ll send out a few things when it comes in!

    read more
  • @Parksider Right, but what if you didn’t get enough protein extraction, would the water have a reaction to the loose fat that would be greater than air?

    read more

Recent Topics


Who's Online [Full List]

20 users active right now (2 members and 18 guests).
Tex_77, Ron Grisar, Jonathon, trussguy1, Parksider, erich52

Board Statistics

Our members have made a total of 8.1k posts in 1.5k topics.
We currently have 5.8k members registered.
Please welcome our newest member, mark1962.
The most users online at one time was 5081 on Fri May 03 2019.

Community Statistics

24
Online

5.8k
Users

1.5k
Topics

8.1k
Posts

About Meatgistics

Meatgistics is brought to you by Walton's (waltonsinc.com). Meatgistics is a community site, knowledgebase, forum, blog, learning center, and a sharing site. You can find help and ask questions about anything related to meat processing, smoking and grilling meats, plus a whole lot more. Join Austin & Jon from Walton's and sign up for our Meatgistics community today.