Meat Processing Equipment 101 - Grinders


  • Team Blue Admin Walton's Employee

    Equipment Header

    Meat Processing Equipment 101 Meat Grinders

    Attend this entry level class from Meatgistics University by watching the video, reading the article and post any questions you have!

    What Are The Main Functions?

    The main function of a grinder is to take a whole muscle cut of meat and break it down into a ground format that can then be seasoned, cured, stuffed into a casing and then cooked.

    Grinder Parts
    Grinder Overhead
    Grinder Closeup

    How Do They Work?

    Electric grinders have a hopper at the top where you load your meat that you are preparing to grind. The hopper has a hole in it that leads down to the throat of the grinder where an auger that is powered by the motor pushes the meat towards the plate and knife that will curt and grind your meat. The grinding knife goes behind the plate with the sharpened surface facing towards the plate, this cuts the meat and forces it through the holes of the grinding plate, the larger the holes on the grinding plate the faster your meat will grind and the coarser your product will be. Many products need to be ground twice, sometimes through a larger plate first and then through a smaller plate and sometimes twice through a larger plate.

    How Important is it?

    It depends on what type of meat you will most often be starting with. If you are going to be starting with whole muscle cuts then it is the most important piece of equipment that you can have! Other than a Bowl Chopper, which is an expensive commercial piece of equipment, will allow you to take a whole piece of meat and break it down into a ground product.

    Alternatives

    Like we said above, a Bowl Chopper will offer you similar functionality but the cost makes them unreasonable for the home processor. The main alternative to a Meat Grinder is to purchase already ground meat. If you want to make snack sticks you can buy ground pork, seasoning and cure it and then use a Sausage Stuffer to stuff it into casings.

    Should You Buy One

    If you are choosing between a grinder and stuffer to make meat sausage at home I would say a wild game processor should go with the grinder as it will allow them to break down the carcass and stuff and the person using beef or pork should get a sausage stuffer and buy pre-ground meat from the store.

    Best Choice For Beginners

    The Weston #12 750 Watt Meat Grinder is a nice choice for beginners as it gives you a medium-sized plate, with a powerful enough motor to break down larger cuts while staying under $200.

    Other Information

    Grinders come in different sizes with different grinding capacities, the number associated with the grinder corresponds to the size of the head assembly as well as the plate and knife you can use with that grinder. Standard sizes are #5, #8, #10 and 12 which are the same size, #22 and #32. A #5 grinder will use a plate that is 2-1/8" in diameter and generally has the ability to grind around 2-3 lb of meat per minute under ideal circumstances.

    A larger grinder like a #32 grinder will use a plate that is 3-15/16" in diameter and something like the Weston #32 Pro Series can grind upwards of 18 lb a minute. The power on a meat grinder also plays an important role in how many lb a minute it can process and how long it can be run for. Power can range from 500 watts on a small #5 up to 2 horsepower for the Weston Pro #32 series. The amount of horsepower is important as this is what drives the auger in the head assembly and more power means you can grind faster and use larger chunks of meat saving you processing time.

    Some meat grinders do have the ability to act as sausage stuffer as well as a grinder. You can switch out the plate and knife for a star stuffing adapter, attach a stuffing horn and stuff your ground product into casings or meat bags. While the stuffing capability is a nice thing to have it is much harder and will take longer to stuff with your grinder versus using an actual sausage stuffer. Because of the pressure required to stuff a product into smaller casings meat grinders will not work on anything smaller than a bratwurst or hotdog sized product.

    Both plates and knives are available in both disposable and sharpenable versions. Disposable should be used until they are dull and then thrown out, sharpenable plates and knives can be sent into Walton’s and we will sharpen them for a small fee. These types of plates and knives are more expensive initially but it is much cheaper to have us sharpen them than buy new ones, plus they are made to a higher quality and will give you a better-finished product. You can see the difference between a disposable and sharpenable knife just by looking at it, the disposable will look like a pinwheel and just has a flat edge, the sharpenable knife has a quality piece of steel on each arm that sticks up from the body.

    Shop waltonsinc.com for Meat Grinders



  • I’m looking for recommendations on an electric meat grinder that is under $200 and QUIET. I understand that all electric meat grinders will make noise but I’m looking for a quieter one… something similar to the noise level of the LEM Big Bite. It’s sole purpose is to grind BONELESS chicken thighs and nothing else. Please help!


  • Team Blue Admin Walton's Employee

    Foodforcats The Weston #12 750 watt is right out, that thing is LOUD. Here is a comparison between the old weston #8 and the weston #8 black series https://youtu.be/bL3ZOWEqsdM?t=139 I’d say that which is here



  • Jonathon Thanks so much. I think I’m going with the Weston #8 575 watt Black!


  • Team Blue

    Foodforcats The #8 is a good grinder. I’ve used it in a professional setting and almost abused it and it keeps ticking. It’s loud-ish but nothing compared to using a KitchenAid with grinder attachment.


  • Team Blue Admin Walton's Employee

    Joe Hell Saying that it is quieter than the KitchenAid? I assume but I want to be sure that is what you mean before I add you against your will to :bluehat:


  • Team Blue

    Jonathon Yes…My kitchenAid absolutely SCREAMS when using the grinder. It’s nothing short of ear piercing.



  • What is the general opinion of Cabela’s Carnivore #22 grinder/stuffer? Thinking of purchasing one and was wondering if anyone has this is grinder/stuffer and what they think of it.


  • Team Blue Power User Traeger Primo Grills PK Grills

    The opinion is to buy a grinder from Walton’s, might I suggest https://www.waltonsinc.com/weston-22-meat-grinder-butcher-series-1-hp


Log in to reply
 


Categories

  • Waltons Community

    A place to talk about whatever you want like Meat Processing, Smoking & Grilling, Hunting, and other Random Topics

  • Podcast

    Listen to Austin and Jon as they talk all things meat processing, beer drinking and sausage making! Email them at [email protected] with any suggested topics or questions!

  • Blogs

    Follow along with Walton’s and the latest news, updates, and updates direct from the experts from Walton’s and Meatgistics, plus, follow along with Joe Hell in his amazing story and blog about “Better Living Through BBQ”!

  • Meatgistics University

    A new way of organizing and accessing any information you might need to make homemade meat products. Broken up into 7 categories and then presented in a class like structure.

  • Waltons Learning Center

    Learn about meat processing with recipes, tips, tricks, Meat Hacks, and more from the expert’s at Walton’s

Recent Topics


Who's Online [Full List]

21 users active right now (1 members and 20 guests).
PapaSop, YooperDog, monte98, Jonathon, Denny

Board Statistics

Our members have made a total of 17.4k posts in 2.1k topics.
We currently have 9.4k members registered.
Please welcome our newest member, monte98.
The most users online at one time was 5081 on Fri May 03 2019.

Community Statistics

26
Online

9.4k
Users

2.1k
Topics

17.4k
Posts

About Meatgistics

Meatgistics is brought to you by Walton's (waltonsinc.com). Meatgistics is a community site, knowledgebase, forum, blog, learning center, and a sharing site. You can find help and ask questions about anything related to meat processing, smoking and grilling meats, plus a whole lot more. Join Austin & Jon from Walton's and sign up for our Meatgistics community today.