Meat Processing Equipment 103 - Meat Mixers

  • Team Blue Dry Cured Sausage Admin Walton's Employee Canning

    Equipment Header

    Meat Processing Equipment 103 Meat Mixers

    Attend this entry level class from Meatgistics University by watching the video, reading the article and post any questions you have!

    What Are The Main Functions?

    A Meat Mixers main function is to mix in seasoning, cure and other additives with your meat. It also plays a very important role in protein extraction when making a cured sausage product.

    Meat Mixer

    How Do They Work?

    Most retail meat mixers, like the Weston 20 and 44 lb models work on an axle and paddle system, where you turn the axle with the hand crank and the paddles spin through the chamber. The meat is added first and sits on the bottom of the mixer, the paddles are angled which allows them to scoop the meat off the bottom, rotate it up and drop it back down to mix it. This way you are getting multiple impacts to help break up the proteins as the seasoning is mixed in.

    How Important Is It?

    Mixing seasoning, cure and other additives in with your meat can be achieved by hand fairly easily, so if you are making a lot of fresh sausages then a meat mixer offers a convenience but it is not necessary. However, if you are making cured sausages then you need to achieve high levels of protein extraction during the mixing process. Protein extraction is a very important part of making certain types of meat snacks, anything that is going to be smoked generally needs protein extraction to keep the meat, fat, water and seasoning all bound together. If you don’t have good protein extraction you run the risk of “fatting out” which is when your fat renders out of your product during the cooking process. This leaves you with an unappetizing fatty film on the outside and a dry product.

    Meat Mixer


    You can mix in seasoning, cures, and additives by hand or you can add them between the first and second grind on your products and let your Meat Grinder do some of the work for you. These methods are easier to do with uncured products but it can also work for cured products, it will just be more time consuming and you might end up with an inferior product.

    Should You Buy One

    If you are making cured products then I believe them to be absolutely necessary, right up there with Stuffers and Meat Grinders. Lack of proper protein extraction can lead to a host of problems during cooking and smoking products. If you are making only fresh products then it is not necessary but it can be convenient to have.

    Best Choice For Beginners

    The Weston 20 lb Meat Mixer is a nice size for making smaller batches, the scoop and drop action helps with protein extraction and it is fairly easy to break down and clean, all for right about $100.

    Other Information

    Be sure that you are spinning the crank an equal number of times in both directions, this will help disperse the seasonings and cures quicker and ensures an even distribution. Some mixers like the 44 lb Weston will hook up with Weston Butcher and Pro Series Grinders, size 22 and above and it will do the mixing for you.

    You also need to use a certain amount of the capacity for this type of mixer to be effective, trying to do a batch that is much below 1/2 of the capacity will give you issues.

    Shop for Meat Mixers

    Shop for Summer Sausage Seasonings

    Shop for Snack Stick Seasonings

  • Does anyone know if the Weston mixers can be used with a cabelas 22# commercial grinder?

  • Team Blue Dry Cured Sausage Admin Walton's Employee Canning

    bpeel1077 I don’t know but I don’t think so, I believe the gearing is shaped differently. I might be wrong though, I’d say you best bet is to go to cabellas and take an auger out and look at the shape of where the auger meats the motor, it might be the same or close enough to make it work. If you are looking at mixers/grinders and can wait our mixers should be in in about 30 days and we are hoping to have the grinders in before Thanksgiving. The mixers we are getting work with both ours and Westons grinders.

  • Jonathon thank you for your response. I already have the cabelas grinder. Had couple hundred dollars of gift cards so went that route. I was wanting to compare the gears but neither item description or the Meatgistics video gave me a very good picture and Walton’s sales team suggested I try this forum. I know it a stretch asking you about another companies product. I do know blue sky makes the cabelas mixer.

  • Team Blue Dry Cured Sausage Admin Walton's Employee Canning

    bpeel1077 Yeah without a cabellas I can’t be sure but here is a pic of the Weston 44 lb meat mixer

Log in to reply


  • Waltons Community

    A place to talk about whatever you want like Meat Processing, Smoking & Grilling, Hunting, and other Random Topics

  • Podcast

    Listen to Austin and Jon as they talk all things meat processing, beer drinking and sausage making! Email them at with any suggested topics or questions!

  • Blogs

    Follow along with Walton’s and the latest news, updates, and updates direct from the experts from Walton’s and Meatgistics, plus, follow along with Joe Hell in his amazing story and blog about “Better Living Through BBQ”!

  • Meatgistics University

    A new way of organizing and accessing any information you might need to make homemade meat products. Broken up into 7 categories and then presented in a class like structure.

  • Waltons Learning Center

    Learn about meat processing with recipes, tips, tricks, Meat Hacks, and more from the expert’s at Walton’s

Recent Topics

Who's Online [Full List]

25 users active right now (6 members and 19 guests).
gkuipers, makerr, bocephus, MTArcher, calldoctoday, Gary L. White, A1lonestar, Weathered100, deweymeats, shoprat53

Board Statistics

Our members have made a total of 22.4k posts in 2.4k topics.
We currently have 10.6k members registered.
Please welcome our newest member, bootswon.
The most users online at one time was 5081 on Fri May 03 2019.

Community Statistics





About Meatgistics

Meatgistics is brought to you by Walton's ( Meatgistics is a community site, knowledgebase, forum, blog, learning center, and a sharing site. You can find help and ask questions about anything related to meat processing, smoking and grilling meats, plus a whole lot more. Join Austin & Jon from Walton's and sign up for our Meatgistics community today.